Skip to content

How To Setup Rockspace Wifi Extender?

If you are still searching for how to setup a Rockspace Wifi extender then your search is end here. Rockspace is a brand of Wifi extenders that allows you to create a private network in your home. With Rockspace, you can set up Wifi and access it from anywhere in your house (or outside). On this page, we’ll show you how easy it is to set up your network using Rockspace extenders!

How To Setup Rockspace Wifi Extender?

You can set up Wifi in Rockspace and access it from anywhere in your home (or outside). This page will show how simple it is to build up your own network using Rockspace extenders!

Logo of mywifisetp
How to setup Rockspace extender?

Rockspace Wifi extender setup using the WPS method

There are several methods for configuring a Rockspace Wifi extender, however, we will focus on the WPS technique first because it is the most efficient way to configure an extender:

  • Activate your Rockspace Wifi extender.
  • Find the WPS button on your wireless range extender.
  • On your existing router/modem, press the WPS button.
  • After a few seconds.
  • Your router and extender are now linked.
  • Select the network you want to extend.

If your router does not have a WPS button, you can still set up your Wifi extender by using the next method.

How to configure a Wifi extender using Re Rockspace local?

In the preceding part, we discussed the WPS method for configuring a Wifi range extender, but in this method, we will configure our extender by using the default web address. This method is also called a manual setup of the extender.

  • Turn on your Wifi range extender.
  • Attach one end of an additional Ethernet wire to the router/modem and the other to a Rockspace Extender port.
  • If you don’t have an ethernet cable don’t worry about that use Wifi to connect your devices.
  • Open your computer or laptop and launch any web browser like Google Chrome, Mozilla Firefox, or Apple Safari.
  • Now, type the default web address of the Rockspace Wifi extender then press the enter button.
  • Enter the login credentials of your Rockspace Wifi extender and hit enter.
  • Follow the on-screen instructions.

Congratulations your Wifi range extender is setup now

Rockspace Wifi extender not connecting?

Is your Wifi range extender not connecting? There are some common issues that are why your Wifi range extender is not connecting don’t worry read this section and fix all that issues.

The Default Web address is not working

  • Sometimes we don’t care about spelling errors and input the wrong web URL in the search bar, ending in the default web address not working, therefore always make sure you type the correct web address in the search field to reach the extender setup page.
  • Delete the caches, cookies, and history of your web browser, and then access your extender setup page.
  • If the extender’s web address is not working, use the Rockspace Wifi extender’s default IP address.

Ethernet Cable is not functioning properly

Make sure your ethernet cable is working fine because if your ethernet cable is damaged at any point then your extender is not connecting. 

Power Outage Issues

The most typical reason for your Rockspace extender to continually disconnect is a power outage or an unnecessary power cut, therefore make sure your extender is receiving a proper power supply.

Start your Rockspace extender again

We all know that if our electronic devices like T.V., cameras, or any device are not working what do we do in this situation? We will restart our electronic device so if our extender is not connecting we can do the same procedure for this we can restart our Rockspace Wifi extender.

  • Remove all the cables between the extender and router.
  • Wait for a few minutes.
  • Reconnect all the cables again between the extender and router.

Check that your extender is working fine now.

How to update the firmware of the wireless range extender?

If we are doing a Rockspace extender setup then firmware upgradation is also necessary for the health of the extender. Many users are unable to update the firmware of their Rockspace extender because they do not follow the step-by-step firmware update guide. So, follow the instructions listed below:

How to update the firmware of the wireless range extender?

Login into your Rockspace Wifi extender

To begin, access your Rockspace extender default login page on your PC or laptop, then enter your Wifi range extender login details.

Download the right firmware file for your extender

After logging into your extender, you must download the correct firmware version for your extender. Always remember that download the correct file for your specific model of Rockspace Wifi extender. And save the file to your computer or laptop.

Upload the right firmware file

Now your firmware file is downloaded then you need to upload that file on your extender. Follow these steps to upload the firmware file:

  • Open the admin panel of your extender.
  • Go to the firmware update option.
  • Then upload the firmware file that you downloaded for your extender.
  • Now hit the install button.
  • Congratulations your Rockspace Wifi extender is updated. 

That’s it! You now have a Wifi extender that can be used to connect your devices to the internet. Don’t forget, though, that this is just the beginning of your journey with Rockspace; we hope you enjoyed following along and learning more about how these devices work. If you have any questions at all, feel free to get in touch with us—we love hearing from our users!

Frequently Asked Question

• First, plug the wifi extender into a power source.
• Now press the WPS button on your router.
• And also press the WPS button extender within two minutes.
• Wait till the extender‘s signal Led turns solid blue.
• You have successfully connected your rock space extender to the new router.

• The Wifi extender is not yet ready to accept the router's signal
• You are struggling to connect incompatible brands of range extenders within your home network.
• The cable connections are damaged.
• The extender's firmware is outdated.

• Connect your mobile device or computer to the router's network.
• Open a web browser and type in the address bar re.rockspace.local or the default address.
• To sign in, enter your admin password.

The default ip address is

• Launch a web browser and typed re.rockspace.local into the search bar
• Navigate to Wireless > Basic, enter a new Wi-Fi name and password, and then click Apply.