Skip to content
Home » Blogs » How to connect with my Netgear genie smart setup

How to connect with my Netgear genie smart setup

    netgear genie smart setup

    The Netgear Networking Routers have become increasingly popular in this day and age due to the high quality of networking technologies. As well as the several important features that these devices can provide. The Netgear Genie setup is one of the most beneficial of such functions. It is a control center for your Netgear devices that you may access from your computer screen. Yet, because Netgear Wifi routers have various features, controlling them all can be difficult. So don’t feel nervous because our article will properly help you.

    Netgear Genie Smart setup Installation Method

    The steps outlined here will guide you through configuring your Netgear network router with the Netgear Genie setup. You’ll notice how the Smart Setup Wizard simplifies the process.

    • First, plug your Wifi router into a wall outlet.
    • Now check that the device you’re using is linked to the network of your router.
    • Then you launch a web browser on your computer.
    • And type the default Ip address of the Netgear router login.

    Note – Don’t know about the Netgear router login default IP address? is the default IP address of the Netgear router login.

    • Fill up the blanks with your Netgear login router information. If this is your first time logging in, use the default password. The default password of the Netgear router is admin.
    • If you see “Netgear Smart Wizard” instead of “Netgear Genie” on your screen, continue to the second method on this page to complete the router configuration process using the Netgear genie smart setup interface. Only older routers support the Smart setup interface.
    • Now select the “Advanced” tab, then click on the ” Netgear genie setup” link on the left sidebar.
    • When asked if you want Netgear to identify your Internet connection, choose “Yes,” then click “Next.” When the Netgear genie setup wizard has finished detecting your Internet network connection, it will display the “Congratulations” page.
    • You have now completed the Netgear Genie Setup process and are ready to enjoy your internet connection.

    If you are still unable to set up your router or are experiencing problems, please contact our technical experts. They will help you in any way.

    Facing a problem with the Netgear Genie Smart setup?

    If you are unable to access the Genie Smart setup process on your Laptop, do not be discouraged; simply follow the steps outlined below:

    • Check to see if the router is linked to a network.
    • Remove the web browser’s temporary data, cookies, and cache.
    • Verify if the computer’s network connection is enabled. If it is not already switched on, turn it on first.
    • Now instead of using the browser’s search bar, type the address straight into the address field.
    • And Connect to the Genie smart setup using another browser.
    • Restart your router.
    • Go to the Netgear update page to update the router’s firmware to the newest version.
    • Reset the router or extender to its factory default setting.


    Finally, please read all of these instructions carefully to Installation the Netgear genie setup because they will be beneficial again in the future. If you continue to get errors, please email us and we will gladly assist you.